
Because LED chips generate considerable heat during operation, especially high-power LEDs, a large amount of heat is produced. If traditional aluminum-based circuit board materials are used, the heat is concentrated and cannot be dissipated in time; as the temperature of the LED chip keeps rising, the LED chip will age, gradually fail, and in severe cases the lamp will go dead. Therefore, when selecting an aluminum substrate, it is necessary to choose one with high thermal conductivity. Once we have selected a good substrate, we may ask: what does such a complex aluminum-based circuit board production process look like, and how is it actually manufactured?
First, aluminum-based circuit boards are made from raw material, namely a whole copper-clad plate that is cut into small pieces to meet production specifications. Of course, this comes after the project data has been processed and the MI (production guidelines) has been prepared.
Next, we carefully define the board production flow according to customer requirements and start production with the customer's requirements at the center. There are the circuit layer, the hole layer and the character layer, as well as the solder mask and the appearance layer.
Handle the boards with care during production to prevent scratches. During V-cut processing, pay attention to the machining depth: if it is too deep, the board breaks easily, which is inconvenient for the customer's subsequent processing and for production itself. Every step should therefore be taken seriously, and when delivering to customers we strive to earn their recognition and favorable comments.
Also pay attention to appearance tolerances, appearance, and open and short circuits,
After V-cut forming, electrical testing is carried out, and the boards are shipped once confirmed OK.
Of course, there are many QC sampling inspections in between, as well as the first-piece inspection.
Thus, an aluminum substrate is completed through many processes and manual work. Defective and scrapped products are controlled at every stage to secure the most cost-effective products for customers.
The products of aluminum substrate manufacturer Mingshihai Electronics are mainly used in aerospace, medical, automotive, communications, power supplies and rail transit; in lighting they are mainly used in miner's lamps, street lights, tunnel lights, panel lights, landscape lighting fixtures and stage lights. Customer requirements are the driving force behind the company's continuous progress, and the company will do its utmost to become your high-quality partner.










