
1. Short circuit of high-power LED aluminum substrate: this is one of the common faults that directly cause the circuit board to fail. The causes of high-power LED aluminum substrate problems are many, and the main one is improper pad design. In this case, the round pad can be changed to an oval one to increase the distance between points and prevent short circuits. Unreasonable component orientation design can also cause the circuit board to short-circuit and fail to work.
2. Golden-colored solder joints: generally, the solder joints of high-power LED aluminum substrates are silver-gray, and golden solder joints occasionally appear. The main cause of this problem is that the temperature is too high. In this case, simply lower the temperature of the solder pot.
3. Dark and granular joints: dark or granular joints appearing on the aluminum substrate are mainly caused by contaminated solder and excessive oxides mixed into the molten tin, forming a solder joint structure that is too brittle. Be careful not to use solder with a low tin content. Another cause of this problem is that the composition of the solder used in manufacturing has itself changed and the impurity content is too high, so pure tin must be added or the solder replaced. Marking-like glass-fiber laminate physical changes, such as separation between layers. However, this is not a solder joint defect. The cause is that the base material is overheated, so it is necessary to lower the preheating temperature and solder temperature or increase the speed of the base material.
4. Loosening or displacement of aluminum substrate components: during reflow soldering, small parts may float on the molten solder and leave the target solder joint. Possible causes of displacement or tilting include vibration or bouncing of components on the aluminum substrate caused by insufficient substrate support, reflow oven settings, solder paste problems, human error, and so on.
The above are the issues to note when designing LEDs, summarized for you by LED aluminum substrate manufacturer Mingshihai Electronics. We hope this helps; if you have any other questions, please feel free to consult our company at any time!










