Products
Products
  • PCB aluminum substrate manufacturer
  • PCB aluminum substrate manufacturer
PCB aluminum substrate manufacturer
Mr. Gou: 15989872495
Ms. Huang: 13632953944
Email: mshpcb@vip.163.com

Product Details

PCB aluminum substrate manufacturerHow can we prevent the bending and warping of PCB aluminum substrates during the production process when they are returned to the soldering furnace?

1. The effect of reducing temperature on plate stress

Due to the fact that "temperature" is the main source of stress in the sheet metal, as long as the temperature of the reflow oven or the heating and cooling rate of the sheet metal in the reflow oven is slowed down, the bending and warping of the sheet metal can be greatly reduced. But there may be other side effects as well.

2. Using high TG board

TG is the transition temperature of glass, which is the temperature at which a material transitions from a glassy state to an rubbery state. The lower the TG value, the faster the board begins to soften after entering the reflow oven, and the longer the time for the board to soften and gel, the more severe the deformation of the board will naturally be. The use of high TG board can improve its ability to withstand stress and deformation, but the material price is relatively high.

3. Increase the thickness of the circuit board

Many electronic products, in order to achieve thinning, have board thicknesses of 1.0mm and 0.8mm. Even with a thickness of 0.6mm, this thickness can keep the board from deforming after welding and truly stand firm. It is recommended that if there are no reckless requirements, the board can be used with a thickness of 1.6mm, greatly reducing the risk of bending and deformation of the board.

4. Reduce the size and quantity of circuit boards

Due to the fact that most back soldering furnaces use chain driven circuit boards, the larger the size of the circuit board, the greater its own weight, which can cause concave deformation inside the back soldering furnace. Therefore, it is recommended to place the long side of the circuit board as one of the edges on the chain back into the soldering furnace to reduce the weight depression deformation caused by the circuit board itself, and to reduce the number of welding repairs. That is to say, for a furnace, try to use a narrow edge perpendicular to the direction of the furnace to achieve low sag deformation.

5. Old oven tray fixing device

If the above method is difficult to implement, another method is to use a furnace tray (reflow carrier/template) to reduce the deformation of the furnace tray, which can reduce the bending of the board due to both cold and hot reasons. It is hoped that the tray can hold the circuit board, and when the temperature of the circuit board is below the TG value, it will start to harden and maintain the size of the garden.

If a single-layer tray cannot reduce the deformation of the circuit board, a cover needs to be added, and the circuit board should be clamped with two layers of trays, which can greatly reduce the problem of reflow oven deformation. However, the tray is quite expensive and requires manual placement and recycling.
That is all.Shenzhen Mingsihai Electronic Technology Co., LtdAs a PCB aluminum substrate manufacturer, if you want to learn more about the relevant measures to prevent PCB aluminum substrate deformation, please feel free to consult.

Online Inquiry

Recommended Products

We are a professional manufacturer specializing in high-thermal-conductivity & high-power single/double-sided aluminum-based PCBs, thermally separated copper-based PCBs, copper-aluminum composite boards and other metal core substrates.
Copyright © Shenzhen Mingsihai Electronic Technology Co., Ltd. | Aluminum PCB Manufacturer, Service Provider, Custom Prototype Pricing, FabricationGuangdong ICP No.19065800